APC Switched Rack PDU

Rack PDU 2G, Switched, ZeroU, 20A/208V, 16A/230V, (7) C13 & (1) C19
Australian stock.Standard manufacturer's warranty for Australia applies. Please refer to the manufacturer's website for warranty details.
  • Our SKU #
    Manufacturer's #
  • 05541
  • Manufacturer's #
  • AP8958

Not in stock
By Order
Calculate Shipping Cost

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.


  • Output
    • Nominal Output Voltage: 200V,208V,230V
    • Maximum Total Current Draw per Phase: 20A
    • Output Connections: (7) IEC 320 C13 / (1) IEC 320 C19 
    • Overload Protection: No
  • Input
    • Nominal Input Voltage: 200V,208V,230V
    • Input Frequency: 50/60 Hz
    • Regulatory Derated Input Current (North America): 16A
    • Input Connections: IEC-320 C20 
    • Acceptable Input Voltage: 100-240 VAC
    • Maximum Line Current per phase: 20A
    • Maximum Input Current per phase: 20A


  • Installation guide, Rack Mounting brackets, Safety guide, Sample locking IEC power cord, Serial configuration cable