APC Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 20A/208V, 16A/230V, (21) C13 & (3) C19

RACK PDU 2G, METERED BY OUTLET
Australian stock.Standard manufacturer's warranty for Australia applies. Please refer to the manufacturer's website for warranty details.
  • Our SKU #
    Manufacturer's #
  • 12272
    -
  • Manufacturer's #
  • AP8659

$1,676.20
Not in stock
By Order
Calculate Shipping Cost

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment.

Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Specifications

Output
Nominal Output Voltage 200V, 208V, 230V
Maximum Total Current Draw per Phase 16A
Output Connections (21) IEC 320 C13 (3) IEC 320 C19
Overload Protection No
Input
Nominal Input Voltage 200V, 208V, 230V
Input Frequency 50/60 Hz
Regulatory Derated Input Current (North America) 16A
Input Connections IEC-320 C20
Acceptable Input Voltage 100-240 VAC
Maximum Input Current per phase 20A

Includes:

  • CAN Port Terminator, Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable